Use the "Where to buy" button below to find a Fuji retailer in your area.
"Weighing in at 1050g, Fuji's high-modulus carbon material uses two levels of carbon resulting in the optimum balance of carbon strength, stiffness and weight. "
Used in both the frame and fork, Kamm tails are truncated airfoils that perform better with less drag at yaw (side winds) angles than full airfoils.
"CFD analysis was used extensively during the design process to ensure airflow was minimized over each section of the frame. "
Progressive stack and reach geometry for industry leading fit. The widest range of stack and reach ensures that all sizes will place riders in the perfect position on the bike.
Keeps the frame from being damaged in the event of chain suck.
Ensures smooth shifts without the risk of dropping the chain to the inside of the crank and onto the bottom bracket shell.
Low profile disc brake caliper designed specifically for road bikes providing cleaner integration and more direct connection of the brake caliper to the frame as well as better alignment of the caliper and brake rotor.
Thru-axles slide through a closed dropout increasing wheel security and the overall lateral stiffness of a frame creating a bike that has precise steering and optimal control.
XXS (46cm), XS (49cm), S (52cm), M (54cm), L (56cm), XL (58cm), XXL (61cm)
C10 high-modulus carbon, integrated and tapered head tube, PF30 BB, and oversized chainstays.
FC-440 carbon monocoque w/ tapered carbon steerer, 12mm thru-axle dropout w/ flat-mount disc system
Oval Concepts 300, M30 spindle, Praxis rings, 52/36T
Praxis PF30 conversion bottom bracket
Shimano 105, braze-on mount
Shimano 105 Dual Control Hydraulic, 11-speed
Shimano 105, 11-30T
KMC X11 w/ MissingLink
Oval Concepts 324 Disc, centerlock hubs, 100x12mm & 142x12mm thru axles, 700c 24/28H rims
Vittoria Zaffiro Pro, 700 x 25c, 60tpi, folding
Shimano 105 Hydraulic, 160/160 rotors
Shimano 105 Hydraulic
FSA Integrated 1 1/4" upper - 1 1/2" lower sealed bearing
Oval Concepts 790 Aero aluminum, 31.8mm clamp, 125mm drop / 75mm reach
Oval Concepts 790 Aero, 3D-forged, -17° w/integrated computer mount
Oval Concepts 438, steel rail
Oval Concepts Transonic Aero, 300mm 46-52cm / 350mm 54-61cm
|A||Seat Tube Center To Top||440||457||484||503||520||538||567|
|B||Seat Tube Effective||460||490||520||540||560||580||610|
|C||Top Tube Effective||500||515||537||552||565||581||600|
|D||Head Tube Length||93||109||129||145||166||183||203|
|E||Seat Tube Angle||74.75°||74.3°||74.2°||74.2°||73.5°||73.5°||73°|
|J||Bottom Bracket Drop||73||70||70||68||68||66||66|
|Seat Post Diameter||N/A||N/A||N/A||N/A||N/A||N/A||N/A|
|5'11" - 6'2"||180cm - 188cm|
|6'1" - 6'5"||185cm - 196cm|
*Suggested sizes shown. For the most accurate sizing please visit your local authorized Fuji retailer for a bike fit and a test ride.